Idiomas disponibles
Idiomas disponibles
Operation instructions
Press "
" button again .
Result :
The louvers swing to a suitable angle as desired.
NOTE:If the unit doesn't have four ways airflow function, you can adjust
horizontal airflow by yourself.(invalid for some models)
Do not turn the vertical adjustment louvers manually, otherwise malfunction may occur. If that happens, turn off the
A
unit first and cut off the power supply, then restore power supply again.
B
It is better not to let the vertical adjustment louver tilt downward for a long time at COOLING or DRY mode to prevent
condensed water from dripping.
SMART mode(
invalid for multi system
In this mode, it can automatically adjust the operation mode, temperature, wind speed, wind direction,
etc. according to the ambient temperature of the room to ensure that customers get the most
comfortable experience.
How to set SMART mode?
Press the
button.
Result :
Enters SMART mode(fuzzy logic operation)
directly only when the unit is on .
Temperature and fan speed are automatically
set based on theactual room temperature.
For the split-type models, such as wall-mounted air conditioners and some
floor-standing air conditioners, their operation mode and set temperature
should be determined based on the indoor temperature.
Operation mode and temperature are determined by indoor temperature
Heat pump models
Indoor temperature
℃(
21
℃-23℃(
21
℃-26℃(
23
Over 26
Cooling only models
Indoor temperature
℃(
23
℃-26℃(
23
Over 26
For commercial air conditioner products, such as cassette type air conditioners, duct type
air conditioners, ceiling & floor air conditioners and some floor-standing air conditioners,
their operation mode should be determined based on the difference between the indoor
temperature and set temperature.
)
Operation mode
70
°F
) or below
70°F-7
3°F
)
73°F-7
9°F
)
℃(
7
9°F
)
Operation mode
7
3°F
) or below
73°F 79°F
-
)
℃(
7
9°F
)
PRESS
HEATING
FAN ONLY
DRY
COOLING
FAN ONLY
DRY
COOLING
5
PRESS
Target temperature
℃(
22
7
2°F
)
Room temperature
℃(
decrease 2
2°F
) after
operate for 3 minutes
℃(
26
7
9°F
)
Target temperature
Room temperature
℃(
decrease 2
2°F
) after
operate for 3 minutes
℃(
26
7
9°F
)
