Gorenje R2-01 Instrucciones página 6

Operation instructions
Turning on
Press button .
T he RUN indicator of the indoor unit lights up.
Result :
SWING , SMART , SUPER , QUIET, TIMER , ECONOMY , IFEEL , DIMMER , CLOCK ,
be specified in the following pages.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
During heating operation, air flow is not discharged at the beginning. After 2－5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
Wait 3 minutes before restarting the appliance.
Airflow direction control
Vertical airflow(Horizontal airflow) is automatically adjusted to a certain angle in accordance with the
operation mode after turning on the unit.
Operation mode
COOLING, DRY
*HEATING,
FAN ONLY
The direction of airflow can be also adjusted to your own requirement by pressing the "
the remote controller.
*Heating mode is only available for heat pump models.
Vertical airflow control (with the remote controller)
Using remote controller to set various angles of flow or specific angle as you like.
Press " " button once.
The vertical adjustment louver will swing up and down automatically.
Result :
Press " " button again .
The louvers swing to a suitable angle as desired.
Result :
Horizontal airflow control (with the remote controller)
Using remote controller to set various angles of flow or specific angle as you like.
Press " " button once.
The horizontal adjustment louver will swing left and right automatically.
Result :
Direction of airflow
horizontal
downward
4
℃ SLEEP and 8 HEAT operation modes will
PRESS
" buttons of
PRESS
PRESS
PRESS