REPLACING THE
MIXER NOZZLES
• Undo the mixer nozzle housing
using a mixer nozzle wrench.
• Remove the mixer nozzle
insert .
• Remove the gasket .
• Replace the mixer nozzle .
• Subsequently put the individual
parts together again.
14
10955015-01_MA-WK7_SPGB_1222.indd 14
10955015-01_MA-WK7_SPGB_1222.indd 14
SETTING THE HOT LIMIT RING
• Turn off the water supply.
• Remove the hot/cold badge .
• Undo the screw in the lever
using an Allen wrench.
• Pull off the lever .
• Remove the attachment ring .
• Undo the cartridge ring using
a wrench.
• Remove the cartridge .
• Remove the hot limit ring
and insert it again according to
the diagram on the right.
• Subsequently put the individual
parts together again.
p
o
n
q
r
s
t
s
02.01.2023 12:57:38
02.01.2023 12:57:38
