Palram Arcadia 5000 Instrucciones De Montaje página 2

IMPORTANT
Please read
these instructions carefully before you start to assemble this carport.
Please carry
out the
steps
in
the order set
out
in
these instructions.
Keep these
instructions
in
a safe
place
for future
reference.
»
Care
and Safety advice
Please
follow the instructions
as
listed in
this manual.
Sort the parts and check against the list of contents.
For safety purposes we
strongly recommend that the product will
be
assembled
by at least two people.
Some parts have metal edges.
Please be
careful when handling components.
Always wear gloves, shoes and safety goggles during assembly.
Do
not attempt to assemble the carport
in
windy
or
wet conditions.
Dispose
of
all plastic bags safely
-
keep
them out of
reach
of small children.
Keep
children away from the assembly
area.
Do
not attempt to assemble the carport if
you are
tired,
have taken drugs,
medications or alcohol, or if you
are
prone to dizzy
spells.
When using
a
stepladder or power tools, ensure
that
you
are
follow
the
manufacturer's safety advice.
Do not climb or stand on the roof.
Heavy
articles should not
be leaned against the poles.
Do
not
hang or lay on
part
216.
Please
consult your
local authorities
if
any permits
are
required to erect carport.
Keep
roof
and
gutters
clean
of
snow,
durt
& leaves.
Heavy
amounts of snow
on
roof
can
damage the carport making it
unsafe
to
stand below or nearby.
This
product
was
designed and produced to
be
a
carport
only.
»
Some versions
of this carport
are painted.
If
color
was scratched
during
assembly it can be fixed
with the following tints:
Gray
-
RAL 7012
»
Cleaning instructions
When your carport needs cleaning,
use
a
mild detergent solution
and rinse
with
cold clean water.
Do
not
use
acetone, abrasive cleaners, or others special detergents to clean the panel.
Before
stating assembly
This carport must
be
assembled on
a
solid
base (such
as
concrete or asphalt).
Choose
your
site carefully before beginning assembly.
Site
surface (mainly below poles)
needs
to
be level.
During assembly
use
a
soft platform below the parts to avoid
scratches and damages.
»T001
-
»
Notes (by steps)
Step
7: Screw 4000
intended to
keep
the parts (gable) stable
till gutters will
be
assembled. If
a
third person
can
hold the
parts
till Step
8,
this screw
can be
assembled
with
all
the
others
at
Step 30.
During assembly some screws are fastened
fully
by wrench
while others
are
fastened just after the whole carport
is
assembled and leveled (Step 21).
Tighten
all screws
when completing
assembly.
Notice the marks on each step:
ZZ:Zzzzj