Removing
Clogs
ILWARNING
Electrical
Shock
or Personal
Injury
Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
For best cleaning results, keep the airflow
passage clear.
Unplug vacuum cleaner.
Check each starred area occasionally
for clogs.
Disconnect the hose from the nozzle
hose and check the hose for clogging.
Inspect hose end and clear any
obstructions.
Reinstall hose and lower plate.
While running the vacuum cleaner
with the hose disconnected, stretch
the hose in and out to remove the
clog.
If the clog still exists, turn the vacuum
cleaner OFF and unplug the power
cord.
Turn the vacuum cleaner over,
exposing the underside.
- 34 -
Remove the lower plate. Remove the
short nozzle hose from the housing by
lifting it straight up.
Inspect the hose end and clear it of
any obstructions. Reinstall the short
nozzle hose and lower plate.
