Jonsered FR 2318 FA 4x4 Manual De Usuario página 11

5. Release the clip on the front cover with the tool
attached to the ignition key, and remove the cover.
6. Pull the spring handle out from the spring holder to
loosen the drive belt tension.
7. Lift the cutting height stay and put it in the holder.
8. Remove the drive belt and put it in the belt holder.
Introduction
WARNING: Before you operate the product,
you must read and understand the safety
chapter.
807 - 001 - 13.06.2018
9. Lower the cutting deck.
10. Lift the equipment frame lock to vertical position.
11. Hold the front edge of the cutting deck with 2 hands
and pull it out.
Operation
To fill fuel
WARNING: Gasoline is very flammable. Be
careful and refuel outdoors (see
on page 8 ).
Fuel safety
11