Removing The Naída Ci Q30 From The Clip; Using The Naída Ci Q30 Sound Processor; Powering The Naída Ci Q30 - Advanced Bionics CI Q30 Guia Del Usuario

Depress the spring end of the clip to open
and secure the sound processor to the
desired location on clothing or in hair.
Removing the Naída CI Q30 from the Clip
To disengage the Naída CI processor
from the clip, first pull back the
release tab that is helping to hold the
processor in the clip.
The processor should come out of the clip with the battery still attached to the processor. It is
recommended that the T-Mic 2/Earhook be removed from the Naída CI Q30 before wearing
the processor completely off the ear. Please see
Using the Naída CI Q30 Sound Processor
Powering the Naída CI Q30
Power supplies and battery chargers should be operated in an open area
CAUTION:
to ensure adequate airflow. While, to date, no injuries have been reported, components
may become hot during normal use or in the event of a fault. If the device's temperature
results in discomfort or pain when touched, disconnect the power source and contact
your local AB representative.
5
1
Carefully remove the Naída CI, leading
with the internal earhook portion. Be
careful not to use the PowerCel as a lever
to remove the Naída CI; this may damage
the battery or the connector on the
Removing the T-Mic 2/Earhook.
Naída CI Q30 Sound Processor User Guide
2
Naída CI.
23