Retekess TR112 Manual Del Usuario página 11

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 92
7.3.2.1: Manual channel search: lightly press"[
] "or "[
] ", the min step value of each
band increases or decreases.
Mini step value of FM: 0.1MHZ,Mini step value of VHF:0.025MHZ
Mini step value of MW: 9KHZ / 10KHZ
Min step value of AIR: 0.025MHZ
Mini step value of SW: 0.005MHZ
7.3.2.2: Semi-automatic channel search: long press"[
]" or "[
]" for 2 seconds, the
radio will quickly search channels based the min step value of each band, will stop search
after finding a channel and play it.
7.3.2.3: Full automatic channel search and storage: In the mode of reception, long press
"[
] " for 2 seconds to automatically search and store channels from the lowest
frequency to the highest frequency of current band. Channel search will stop automatically.
In the process of automatic channel search," PRESET 01-PRESET**" appears on the top
right of LCD (the number means the address of storing a channel). After a round of search is
finished, search will stop automatically and the program of the first frequency stored will be
played. Number of channels stored of every band: 199, 995 channels in
total (except WB). Warm prompt: the number of channels stored depends on local signal
intensity.
7.3.2.4: Shuttle channel search: in the mode of reception, rotate the shuttle knob on the right
of radio"[
]" to choose a channel up and down. Quick shuttle channel search: rotate
"[
] ", the number behind the frequency flashes for 2 seconds. When the number
is flashing, lightly press"[
] " to switch between numbers flashing. When the number is
flashing, rotate"[
] " to quickly choose a channel up and down.
7.3.2.5:"[
] " Manual knot channel search Special description of manual channel
search:
Limited by the chip of this product, VHF/AIR/WB only supports rough frequency adjustment
and doesn't support accurate manual channel search using the knob, which means that the
step is limited and fine adjustment can only be realized in combination with TUNE+/TUNE-.
rough frequency adjustment and doesn't support accurate manual channel search using the
knob, which means that the step is limited and fine adjustment can only be realized in
combination with TUNE+/TUNE-.
In the mode of FM/MW/SW, channels can be searched manually using the knot.
In the mode of FM/SW, when searching channels manually using the knob, lightly press"SUB
BAND" to choose from four receiving band ranges.
FM1:87-108MHZ
FM2:76-108MHZ
FM3:70-93MHZ
FM4:64-88MHZ
In the mode of FM, when any range is chosen, the mode of manual tuning will search in one
of ranges.
In the mode of SW, lightly press" SUB BAND" to choose from 11 receiving band ranges.
08
loading