Assembling The Heater; Installation - Qlima PEW 3015 Instrucciones De Uso

• During operation and just after operation
• Switch off the appliance when it is unat-
• Do not cover or obstruct the heater when in
• Disconnect from mains during installation,

ASSEMBLING THE HEATER

INSTALLATION

•
4
34
with a device to control the room tempera-
ture. Do not use this heater in small rooms
when they are occupied by persons not
capable of leaving the room on their own,
unless constant supervision is provided.
the appliance will be extremely hot. NEVER
touch it during operation or just operation.
NEVER move the appliance during this time.
tended.
use.
cleaning and/or lamp replacement and
ensure the lamp is cool.
If you fail to consult and/or follow up the
rules, instructions and explanation, the war-
ranty will no longer be valid, and the man-
ufacturer will no longer deal with any dam-
age to the appliance and/or your environ-
ment under the warranty.
The manufacturer is not responsible for any harm or damage if attention is
not paid to the points described above.
The use of this product and the elements required for that purpose is entirely
at the end user's own risk.
Make sure to mount the appliance only on a firm and sturdy underground. In
case of doubt have underground checked by an expert.
WARNING - this appliance must be connected to an earthed power socket.
The heater is fitted with a supply cable and molded plug, therefore the ter-
minals should not be interfered with. The following points should be consid-
ered when positioning the heater:
Please observe the minimum safe distance between the heater body and any
inflammable surfaces. (See Fig 1).