Idiomas disponibles
Idiomas disponibles
HOW TO
ASSEMBLE
THE HANDLE
1. Remove the T-knobs and U-bolts
from the lower handle (Figure 2).
2. Put the upper handle in the operat-
ing position.
3. Install the U-bolts and tighten the
T-knobs.
NOTE: Make sure that the cable is not
pinched between the upper and lower
handle.
Lower Handle
T-knob
U-bolts
Handle
I
Figure 2
_" CHECKLIST
Before you operate your new snow
thrower, to ensure that you receive the
best performance and satisfaction from
this quality product, please review the
following checklist:
_" All assembly instructions
have been
completed.
_" The discharge chute rotates freely.
_" No remaining loose parts in carton.
While learning how to use your snow
thrower, pay extra attention to the fol-
lowing important items:
_" Engine oil is at proper level. Use a
high quality detergent
oil classified
"For Service
SG, SH, SJ, SL, or
higher".
_" Make sure gas tank is filled properly
with clean, fresh, unleaded gasoline
with a minimum of 85 octane.
_" Become familiar
with all controls-
their location and function.
Operate
controls before starting engine.
1741476
8
