Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL OF UNIVERSAL LOADING CHARGER
GB
CAREFULLY READ THE FOLLOWING INSTRUCTIONS BEFORE CONNECTING
Read these instruc ons carefully to make the best use of your device and avoid future problems.
Polar s.r.l. strongly recommend that you carefully follow all the informa on and ps reported below
for a safe use of your device.
The correct use of your device will increase its opera ng life and maximize its efficiency.
If you have any feedback for us, your sugges ons will be highly appreciated to improve the quality
of our service.
Thank you for your trust and for choosing our products.
For more informa on, technical details, brochures or illustra ve material please contact us
or visit our website: www.polar-electronics.com.
High-frequency ba ery chargers 'Universal Loading Chargers' are designed by POLAR srl for use
in industrial environments. Par cular a en on has been paid to sa sfying the requirements
of the different market applica ons. Inverter ba ery chargers, for charging all types of ba eries,
with the possibility of selec ng voltage, current, charging curve, and charging dura on.
Universal Loading Charger is suitable for charging and desulpha ng ba eries from 100 to 1000 Ah,
2, 6, 12, 24, 36, 48, 64, 72, and 80V with buffer maintenance stage, for safe charging of ba eries
connected to vehicles with electronic control units.
The environment in which the ba ery charger is installed must meet the minimum requirements
to ensure the safety of the operator and the perfect func oning of the device, therefore it must be:
dry, ven lated and not dusty.
In rela on to its degree of protec on, the charger must not be exposed to splashing water or rain.
The charger must not be installed in places that are considered hazardous in rela on to the present,
such as:
- Chemical and wood processing industries where there are flammable products.
- Ceramic industries, due to the large presence of dust.
- Food and meat processing industries, due to the large presence of water and humidity.
In these cases, it is necessary to install the ba ery charger in protected rooms.
Posi on the charger to ensure that the intake and exhaust openings of the forced ven la on are not
obstructed and that cooling air circula on is promoted.
For the same reason, do not accumulate various objects in proximity to the charger, and do not place
objects of any kind or containers of liquids on it.
THE DEVICE TO THE POWER SUPPLY AND / OR THE BATTERY.
ALSO, MAKE SURE THAT THE SIZE OF THE DEVICE
IS APPROPRIATE FOR THE BATTERY CONNECTED TO IT.
DESCRIPTION
RECOMMENDATIONS
INSTALLATION
9.
