Idiomas disponibles
Idiomas disponibles
• Do not pick up soot, cement, plaster, or drywall dust without cartridge filter
and collection filter bag in place. These are very fine particles that may pass
through the foam and affect the performance of the motor or be exhausted
back into the air. Additional collection filter bags are available.
• Do not leave the cord lying on the floor once you have finished the cleaning
job. It can become a tripping hazard.
• Use special care when emptying heavily loaded tanks.
• To avoid spontaneous combustion, empty tank after each use.
• The operation of a utility vac can result in foreign objects being blown into eyes,
which can result in eye damage. Always wear safety goggles when operating
vacuum.
• STAY ALERT. Watch what you are doing and use common sense. Do not use
vacuum cleaner when you are tired, distracted, or under the influence of drugs,
alcohol, or medication causing diminished control.
• WARNING! DO NOT use this vacuum cleaner to vacuum lead paint debris
because this may disperse fine lead particles into the air. This vacuum cleaner
is not intended for use under EPA Regulation 40 CFR Part 745 for lead paint
material cleanup.
SAVE THESE INSTRUCTIONS
DO NOT LEAVE VACUUM UNATTENDED WHEN IT IS
PLUGGED IN AND/OR OPERATING. UNPLUG UNIT WHEN
NOT IN USE.
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. This appliance is equipped with a cord having an
equipment-grounding conductor and grounding plug. The plug must be inserted
into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
WARNING!
EQUIPMENT-GROUNDING CONDUCTOR CAN RESULT IN A RISK
OF ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN
OR SERVICE PERSON IF YOU ARE IN DOUBT AS TO WHETHER THE
OUTLET IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG
PROVIDED WITH THE APPLIANCE - IF IT WILL NOT FIT THE OUTLET,
HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This appliance is for use on a nominal 120-volt circuit, and has a grounded plug
that looks like the plug illustrated in SKETCH A. A temporary adapter that looks
like the adapter illustrated in SKETCHES B and C may be used to connect this
plug to a 2-pole receptacle as shown in SKETCH B if a properly grounded outlet
is not available. The temporary adapter should be used only until a properly
grounded outlet (SKETCH A) can be installed by a qualified electrician. The
green colored rigid ear, lug, or the like extending from the adapter must be
connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by a metal screw.
2
IMPROPER CONNECTION OF THE
