Idiomas disponibles
Idiomas disponibles
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with tools to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes, resulting in possible
serious injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use
of attachments or accessories not recommended can
result in serious personal injury.
NOTICE:
Before each use, inspect the entire product for damaged,
missing, or loose parts such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced. Please contact customer service or a quali-
fied service center for assistance.
BEFORE USING THE LOG SPLITTER
See Figures 2 - 4.
This tool is designed for home use only. Never split logs larger
than 12 in. diameter or 20 in. long. Some types of wood are
harder to split than others.
Sort the logs and remove any foreign debris or logs that
are too hard to split or too small.
ASSEMBLY
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
OPERATION
Avoid logs with knots.
Position the logs to split within easy access and easy
reach.
Prepare an area for finished split logs.
Make sure the log splitter is level and on a flat surface.
Use wedges or small logs to block the wheels and prevent
movement.
Make sure all handles are returned to the correct starting
positions.
Logs should be placed in the center of the work table
for best results.
Logs should be placed so that the cut is done with the
grain.
Remove scabbard before operating.
Tether the scabbard to the frame of the log splitter.
INSTALLING/REMOVING BATTERY PACK
See Figure 5.
To install battery packs:
Raise the battery cover.
Align raised ribs on battery pack with grooves in the bat-
tery port and place the battery pack in the log splitter.
WARNING:
Make sure the latch on the bottom of the battery pack
snaps in place and the battery pack is fully seated and
secure in the battery port before beginning operation.
Failure to securely seat the battery pack could cause the
battery pack to fall out, resulting in serious personal injury.
Lower the battery cover.
7 — English
