Parkside HG09501 Instrucciones De Utilización Y De Seguridad página 29

Placement of the base (Figure D)
The soldering iron holder
right or left side on base
as an option for left or right-handed user.
The soldering iron holder
correct position to rear side of the base
Figure D in order to prevent restriction on use of the preci-
sion engineer's LED magnifying glass
and alligator clips
Mount the base plate (Figure E)
Screw the base plate
provided, as shown in Figure E. Use a suitable screw-
26
driver (not included).
Use
Using the product
Turn the retaining screws
a clockwise direction. Clamp the item to be repaired with
the alligator clips
Note: Pay attention to a balanced weight distribution
for better stability of the product.
could be installed on either
13
with screwdriver (not included)
14
should be adjusted the
13
.
18
to the base
25
on the alligator clips
19
in the repair device
18
as shown in
14
, fixing clamp
1
using the screws
14
18
.
15
GB/IE
11
in
29