Idiomas disponibles
Idiomas disponibles
Set Up:
1. Find a flat, level lawn surface that is free and clear of stones,
branches or other sharp objects that may puncture the pool liner or
cause injury.
2. Move the product (in its package) to the selected site before
inflating - do not inflate the product and drag it since it may result
in leaks or damage. Slowly unfold the product and inspect the
product for rips, tears or punctures. Do not use if the product is
damaged.
3. Lay the pool out as evenly as possible and inflate the bottom air
chamber first with an air pump, and then the next chamber or
chambers in sequence.
Open the first
Inflating
valve
4. Fill the product with air until the surface is firm to the touch. Do
not over-inflate or use high pressure air compressor since it may
result in seam leaks.
5. Close and recess all inflation valve caps and slowly fill the pool
with water. Do not exceed the middle-layer level of the pool to avoid
water overflow or pool deformation.
10
Close the first
Open the second
valve
valve
MAX
Drain your Pool:
1. Simply open the air valve caps and exhaust valve caps to deflate
the air chambers. Slowly lift one side of the pool to drain the
remaining water from your pool; or, drain the pool water using a
garden hose siphon.
2. Reinsert all the valve caps afterward for storage.
3. Ensure the pool and all its parts are completely dry before folding
to prolong a product lifespan. Sprinkle talcum powder to prevent
vinyl from sticking together and to absorb any water you may have
missed.
4. Fold the swimming pool. Store in a dark and dry place.
Repair patch:
A repair patch has been included with the product to repair small
leak and holes. Refer to the instructions on the back of the repair
patch.
Package Contents
1 x Inflatable Swimming Pool
1 x User Manual
1 x Repair Patch
1 x Electric Air Pump
1 x Water Inlet Device
11
