Installing The Handles; Adding Oil/Checking Engine Oil - Pulsar G65BN Manual De Instrucciones

Installing The Handles (See fig 4)
• Place 2 bushings on handle and slide handle in place with the pre-drilled hole on the generator frame.
• Insert bolt through the handle and frame and tighten with nut.
• Repeat on opposite side.
Adding / Checking Engine Oil (See fig 5)
Place generator on a level surface.
•
Clean area around oil fill.
•
Remove oil fill cap and wipe dipstick clean.
•
Screw dipstick into filler neck. Remove dipstick and verify oil level is within safe operating range.
•
Add recommended engine oil as necessary. (See Add Engine Oil.)
•
Install oil fill cap/dipstick and hand-tighten.
•
ASSEMBLY
Fig 4
10