Idiomas disponibles
Idiomas disponibles
Installation
Instructions
FEED WATER SUPPLY (cont,)
INSTALLING
THE TUBING TO TANK
AND FAUCET
1.
Measure
3/4" from
the end of each
remaining
piece of tubing
(faucet
end and
inlet
end) and mark with
a pencil.
(Check
for roundness,
smoothness,
cuts, nicks,
flat spots
and sharp
edges).
INCORRECT
.
.
Push the tubing
firmly
into each fitting
on
the manifold
until
the line is flush
with
the
fitting
collar.
(If the tubing
is removed,
re-
cut the end, measure,
mark and re-insert).
Tubing
must
be fully
inserted
to avoid
leaks. To remove
tubing:
depress
and hold
white
collet; pull tubing
out to remove.
White
Collet
_///////_/
(DO NOT REMOVE)
__/
Insertion
I_
Insert tubing
_
_(3ngagemen--_
3/4"
-I
/8" tubing)
i
Pull out slightly
on tubing
to ensure
a
good
seal.
12
