12 V Power Supply
EN
12 V Alimentation
FR
ter use, pull the product on its plug housing! In case of
emergency, during thunderstorms and after use, pull the
product on its plug housing!
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit connectors and circuits.
A defective device may not be put into operation, but must
be disconnected from mains and protected against fur-
ther use.
• Use product, product parts and accessories only in per-
fect condition.
• Avoid stresses such as heat and cold, moisture and di-
rect sunlight, microwaves, vibrations and mechanical
pressure.
• In case of questions, defects, mechanical damage, trou-
ble and other problems, non-recoverable by the docu-
mentation, contact your dealer or producer.
• Do not repair defective products yourself, but contact the
dealer or the manufacturer.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against ac-
cidental use.
Tripping hazard
Cables can be overlooked.
• Route the cable safely.
• Install the product and devices attached to it in a way
that persons cannot be injured, or objects cannot be da-
maged for example by dropping or stumbling.
Heat accumulation
• Do not cover the product.
• Keep enough space around all devices for a good ventla-
tion and free motion and to avoid damages.
2 Description and function
2.1 Product
The product is a stabilised power supply unit for charging
and operating electrical devices via a DC connection. It con-
verts mains voltage into 12 V output and provides protection
against short circuit, overload, overvoltage and overcurrent.
2.2 Scope of delivery
12 V Power Supply, User Manual
2.3 Operating Elements
See Fig. 1.
1 Power LED
2 Euro plug
3 Intended use
This product is intended exclusively for private use
and its intended purpose. This product is not inten-
ded for commercial use. We do not permit using the
device in other ways like described in chapter „Description
and Function" or in the „Safety Instructions". Use the product
only in dry interior rooms. Not attending to these regulations
and safety instructions might cause fatal accidents, injuries,
and damages to persons and property.
4 Preparation
1. Check the scope of delivery for completeness and in-
tegrity.
2. Compare the specifications of all used devices to ensu-
re compatibility.
5 Connection and operation
NOTICE! Material damage due to incorrect output
voltage or polarity
If the output voltage is too high or the polarity is incorrect,
your connected device may be severely damaged. Informati-
on on polarity and voltage can be found in the operating ins-
tructions of your device or on the original power supply unit.
• Do not overload the product.
• Make sure that the polarity is correct.
• Make sure that the output voltage of the power supply
matches the required input voltage of the device to be
connected.
1. Insert the Euro plug (2) into a free and easily accessi-
ble socket.
The power LED (1) lights up when the power supply unit
REV2023-07-18
Subject to change without notice. |
V1.0anw
Sous réserve de modifications.
3 DC plug
is connected to a power source.
2. Connect the DC plug (3) of the power supply unit to your
device. Make sure that the polarity and fit of the plug
are correct.
The power supply works with positive polarity, i.e. with
the positive pole on the inner contact.
3. Disconnect all plug connections after use.
6 Maintenance, Care, Storage and
Transportation
The product is maintenance-free.
NOTICE! Material damage
• Always disconnect the mains plug before cleaning.
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry
and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
7 Disposal instructions
According to the European WEEE directive, electrical
and electronic equipment must not be disposed with
consumers waste. Its components must be recycled
or disposed apart from each other. Otherwise conta-
minative and hazardous substances can damage the health
and pollute the environment. As a consumer, you are com-
mitted by law to dispose electrical and electronic devices to
the producer, the dealer, or public collecting points at the
end of the devices lifetime for free. Particulars are regulated
in national right. The symbol on the product, in the user ma-
nual, or at the packaging alludes to these terms. With this
kind of waste separation, application, and waste disposal of
used devices you achieve an important share to environ-
mental protection.
WEEE No: 82898622
1 Consignes de sécurité
Le mode d'emploi fait partie intégrante du produit et com-
prend d'importantes informations pour une bonne installati-
on et une bonne utilisation.
• Lisez le mode d'emploi attentivement et complètement
avant de l'utiliser.
Le mode d'emploi doit être disponible à des incertitudes et
transfert du produit.
• Conservez soigneusement ce mode d'emploi.
Notes pour la séparation des réseaux
Le produit n'a pas d'interrupteur d'alimentation et peut être
utilisé que dans des points facilement accessibles en cas
d'urgence et rapidement après l'utilisation de cette pour les
supprimer.
Sans surcharge de tension uniquement lorsque le bou-
chon est tiré.
• Tirez en cas d'urgence directement après utilisation et
pendant les orages, branchez le boîtier de connecteur!
• Ne pas ouvrir le boîtier.
• Ne modifiez pas le produit et les accessoires.
• Pas court-circuiter des connexions et circuits.
Un appareil défectueux ne doit pas être mis en service. Il
doit au contraire être immédiatement mis hors tension et
protégé contre toute utilisation involontaire.
• Utilisez le produit, pièces et accessoires des produits
uniquement en parfait état.
• Éviter des conditions extrêmes, telles que la chaleur ex-
trême et froid, l'humidité et de la lumière directe du so-
leil, ainsi que microondes, des vibrations et de la pressi-
on mécanique.
• En cas de questions, les défauts, les dommages mécani-
ques, des ingérences et d'autres problèmes, non récupé-
rables par la documentation, contactez votre revendeur
ou le producteur.
• Ne réparez pas vous-même les produits défectueux,
mais contactez le revendeur ou le fabricant.
Non destiné à des enfants. Le produit n'est pas un jouet!
• Sécuriser l'emballage, petites pièces et l'isolation contre
l'utilisation accidentelle.
- 3 -
Pillmannstraße 12 | 38112 Braunschweig | Germany
64975, 64976
Goobay® by Wentronic GmbH
