Global Industrial 292855 Manual Del Usuario

Aire acondicionado de pared con wifi
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

User's manual
Customer Service
US: 1-800-645-2986
Through The Wall Air Conditioner with Wifi
Model 292855 08,000 BTU, Cool Only, Energy Star, Wifi Enabled, 115V
Model 293070 10,000 BTU, Cool Only, Wifi Enabled, 115V
Model 292856 12,000 BTU, Cool Only, Energy Star, Wifi Enabled, 115V
Model 292857 14,000 BTU, Cool Only, Wifi Enabled, 208/230V
WARNING
Read all instructions before use.
To reduce the risk of fire, electric
shock, or injury to persons when
using this appliance, follow the
following precautions:
• Plug into a grounded 3 prong outlet.
• DO NOT remove the ground prong.
• DO NOT use a plug adapter.
• DO NOT use an extension cord.
• Unplug the air conditioner before servicing.
• Two people are recommended to lift and install the unit.
The electrical ratings for your air conditioner are listed on
the model and serial number label located on the front,
left side of the unit (when facing front).
Recommended Ground Method
For your personal safety, this air conditioner must be
grounded. This air conditioner is equipped with a 3 prong
power supply cord and a grounded plug. To minimize the
possibility of electrical shock, the cord must be plugged
into a 3 prong outlet and grounded in accordance with
all local codes and ordinances. If a 3 prong outlet is not
available, it is the customers responsibility to have a
proper 3 prong outlet installed by a qualified electrician.
Manual del usuario
Servicio de atención al Cliente
US: 1-800-645-2986
Model 292858 08,000 BTU, Cool With Heat, Wifi Enabled, 115V
Model 292859 10,000 BTU, Cool With Heat, Wifi Enabled, 208/230V
Model 292860 12,000 BTU, Cool With Heat, Wifi Enabled, 208/230V
Model 292861 14,000 BTU, Cool With Heat, Wifi Enabled, 208/230V
It is the customers responsibility:
• To contact a qualified electrician.
• To assure that the electrical installation is adequate
and in conformance with the National Electrical Code,
ANSI/NFPA 70 - latest edition, and all local codes
and ordinances.
LCDI Power Cord and Plug
This air conditioner is equipped with an LCD (Leakage
Current Detection and Interruption) power cord that is
required by UL. This power supply cord contains state-
of-the-art electronics that sense current leakage. If the
cord is damaged and leakage occurs, power will be
disconnected from the unit.
The test and reset buttons on the LCDI plug are used to
check if the plug is functioning properly. To test the plug:
1. Plug power cord into a grounded 3 prong outlet.
2. Press RESET (on some units a green light will turn on).
3. Press the TEST button, the circuit should trip and cut
all power to the air conditioner (on some units a green
light will turn off).
4. Press the RESET button for use. You will hear a click
and the A/C is ready for use.
1
Manuel de l'utilisateur
Service à la clientèle
Canada: 888-645-2986
062019
Tabla de contenido
loading

Resumen de contenidos para Global Industrial 292855

  • Página 7 Aire acondicionado de pared con Wifi Modelo 292858 08,000 BTU, Frío con calor, con Wifi, 115V Modelo 292855 08,000 BTU, Solo Frío, Energy Star, con Wifi, 115V Modelo 292859 10,000 BTU, Frío con calor, con Wifi, 208/230V Modelo 293070 10,000 BTU, Solo Frío, Energy Star, con Wifi, 115V Modelo 292860 12,000 BTU, Frío con calor, con Wifi 208/230V...
  • Página 8: Aire Acondicionado De Pared

    Manual del usuario Aire acondicionado de pared INSTRUCCIONES DE INSTALACIÓN Y MONTAJE Notas: • El botón RESET (REINICIAR) debe estar activado para un Dimensiones de la cubierta de pared universal uso adecuado. Nota: • El cable de alimentación debe reemplazarse si no se •...
  • Página 9 Manual del usuario Aire acondicionado de pared Las cubiertas Frigidaire existentes pueden tener rejillas de entrada de un solo lado más antiguas Estas rejillas deben reemplazarse con el tipo de rejilla de doble entrada. Ubicaciones de • Retire la rejilla existente y guarde los tornillos de montaje. los tornillos de la rejillas •...
  • Página 10: Uso De Aire Acondicionado

    Manual del usuario Aire acondicionado de pared Instrucciones de instalación del kit de ajuste 3. Botón de encendido: Enciende y apague el aire acondicionado. 1. Instale el sello de relleno largo de 1" x 1" x 84" entre 4. Botón de modo: Presione el botón de modo para recorrer la cubierta de la pared y la unidad.
  • Página 11: Control Remoto

    Manual del usuario Aire acondicionado de pared 7. Botón de dormir: Presione el botón SLEEP . La luz de Sleep se 9. Botón de filtro: Cuando la luz Chequear filtro (Filter Check) encenderá después, y todas las luces restantes se apagarán. En está...
  • Página 12: Solución De Problemas

    Manual del usuario Aire acondicionado de pared SOLUCIÓN DE PROBLEMAS Problema Causa Solución El aire acondicionado está Asegúrese de que el enchufe del aire acondicionado esté completamente desenchufado. insertado en la toma de corriente. El fusible está fundido/se Verifique la caja de fusibles/disyuntores de la casa y reemplace disparó...

Este manual también es adecuado para:

293070292856292857292858292859292860 ... Mostrar todo

Tabla de contenido