Idiomas disponibles
Idiomas disponibles
The door does not
close properly
LED display is not
working properly
Error code "L1"
Error code "L2"
Error code "F1"
Error code "F2"
Error code "HOO"
Error code "LOO"
Replacing light
This appliance consists of light-emitting diodes (LEDs). This type of diode cannot be changed by the
consumer. The lifetime of these LEDs is normally sufficient for no change to be made. If however, and
despite all the care taken during the manufacture of your wine cellar, the LEDs were defective, please
contact your after-sales service for any intervention.
Expansion and contraction of the internal walls may cause a cracking
sound.
The appliance is not level
Check if fan is in good condition
The appliance is not level.
The door seal is dirty or damaged.
The shelves are not positioned correctly.
A part of the contents is preventing the door from closing.
Control panel failed
Power PCB has broken
The appliance is not plugged in
The probe is not working
Open circuit of temperature probe
Short circuit of temperature probe
Open circuit of fan in upper zone
Open circuit of fan in lower zone
High temperature alarm: When temperature is over 25°C for over 6 hours
Low temperature alarm: When temperature is below 2°C for over 6 hours
39
