Idiomas disponibles
Idiomas disponibles
- disconnect the thermostat faston connectors
- remove the thermostat dial and the ring nut (item 5-6 Plate E),
- remove the thermostat sensor located inside the compartment (item 7
Plate C)
- replace the thermostat and the relative sensor
- perform the above operations in reverse order to reassemble
5.4.7 REPLACING THE YELLOW INDICATOR LIGHT AND
THE LIGHT SWITCH
After carrying out the operations described in 5.1 above, to replace the
yellow indicator light and the light switch proceed as follows:
- remove the control panel fixing screws
- disconnect the faston connectors for both the yellow indicator and
the light switch (item 4-13-14 Plate E)
- replace the yellow indicator light
- replace the light switch
- perform the above operations in reverse order to reassemble
5.4.8 REPLACING THE HEATING ELEMENTS
After carrying out the operations described in 5.1 above, to replace the
heating elements proceed as follows:
- Unfasten the fixing screws.
- Disconnect the heating element supply wires.
- Remove the heating elements (item 10 plate E).
- Perform the above operations in reverse order to reassemble.
5.5
DISPOSAL
When the oven or its spare parts are dismantled, the various
components must be sorted by type of material and disposed of in
compliance with current local laws and regulations.
The presence of a wheeled dustbin with a line
through it indicates that within the European Union
electrical components are subject to special collection
at the end of their working life. As well as to this
device, the standard applies to all of its accessories if
marked with this symbol. Do not dispose of this
product as normal urban waste.
6
LIST OF SPARE PARTS
Index of plates
Plate A
PM-PD 60.60 - Baking chamber assembly;
Plate B
PM-PD 72.72-65.105-105.105-105.65 – Baking chamber
assembly;
Plate C
iD 60.60 M/D - Baking chamber assembly;
Plate D
iD 72.72-65.105-105.105-105.65 M/D – Baking chamber
assembly;
Plate E
L60.60-72.72-65.105-105.105-105.65
compartment assembly;
Plate F
PM 60.60 - Wiring diagram;
Plate G
PD 60.60 - Wiring diagram;
Plate H
PM 72.72-65.105-105.105-105.65 - Wiring diagram;
Plate I
PD 72.72-65.105-105.105-105.65 - Wiring diagram;
Plate L
iD/M 60.60 - Wiring diagram;
Plate M iD/D 60.60 - Wiring diagram;
Plate N
iD/M 72.72-65.105-105.105-105.65 - Wiring diagram;
Plate O
iD/D 72.72-65.105-105.105-105.65 - Wiring diagram;
Plate P
L60.60-72.72-65.105-105.105-105.65 - Wiring diagram;
Plate Q
Electric diagram vapour aspiration hood
INSTRUCTIONS FOR ORDERING SPARE PARTS
Orders for spare parts must contain the following information:
- Appliance type
- Appliance serial number
- Name of part
- Number required
-
Leavening
UK/9
