Idiomas disponibles
Idiomas disponibles
Connecting Power
1. Connect the female end of the power cord
to the power connector (
and the male end to an electrical outlet (
2. Press the power switch (
power indicator ( POWER ) on the front lights
green.
The corresponding bay charge LED (CH1 / CH2)
would light up to indicate the battery charge
level.
Battery Level
< 20%
The first (lowest) bar blinks.
20% ∼ 40%
The first two bars blink in turn.
40% ∼ 60%
The first three bars blink in turn.
60% ∼ 80%
The first four bars blink in turn.
80% ∼ 100%
All five bars blink in turn.
100%
Only the fifth (highest) bar glows.
NOTE: The first bar of CH1 LED will glow in
orange if charging is in an abnormal state.
Safety Instructions
•
If a ground/earth pin attachment plug on the
AC power cord is provided, always plug the
cord into a grounded/earthed outlet. Do not
disable ground/earth pin of the plug/cord.
•
Avoid placing the charger in a location subject
to high humidity, extreme temperatures, me-
chanical vibration, or heavy dust.
•
Do not cover or block any ventilation openings
on the charger. For example, do not place the
charger on a bed, sofa, rug, or other similar
surface. Otherwise, overheating may occur
that results in damage to the charger.
•
Do not place the product on an unsteady sur-
face.
•
To avoid hastening the deterioration of the
battery pack thereby prolonging its useful
life, minimize the number of times you charge
it so as not to frequently increase its internal
temperature.
2
) on the charger
).
) to power up. The
LED States
•
The charger will stop charging when input
voltage from the AC power line is unstable.
•
Avoid touching any connectors.
•
Avoid exposing the charger to water or an
electric shock may occur.
•
Disconnect the AC power cord from the charger
when not in use. As long as the charger is con-
nected to AC power, it is still in standby mode
even if its power is turned off.
Related documents (including this one) are
available at the Getac website:
https://support.getac.com/Portal/Page/809
Regulatory Information
Europe
Getac hereby declares that this pro-
duct complies with the EU Directive
2014/30/EU and 2014/35/EU. The full
text of the EU declaration of conform-
ity is available at:
https://support.getac.com/Portal/Page/809
Company name Getac Technology GmbH.
Kanzlerstrasse 4
Address
40472 Dusseldorf, Germany
Phone
+49 (0) 211-984819-0
EU RoHS
Getac products meet the requirements of
Directive 2011/65/EU on the restriction of the
use of certain hazardous substances in electrical
and electronic equipment. For more information
about RoHS, go to:
https://www.getac.com/us/environment/
Waste Electrical and Electronic Equipment (WEEE)
This symbol means that according to local laws
and regulations your product shall be disposed of
separately from household waste. When this pro-
duct reaches its end of life, take it to a collection
point designated by local authorities. Proper re-
cycling of your product will protect human health
and the environment.
Company name Getac UK Ltd.
Getac House, Stafford Park 12,
Address
Telford, Shropshire, TF3 3BJ, UK
Phone
+44 (0) 1952-207-222
