Getac AY-C431 Guia Del Usuario página 3

Identifying Components
Different AY-C431 models have different type
battery bays. Shown here is one of them as the
example.
No. Component
Bay 1 slot
Bay 2 slot
Bay 1 Charge indicator
Power indicator
Bay 2 Charge indicator
Power switch
Power connector
Product Specifications
Item
Applicable A140, B300, B360, F110, K120,
computer models RX10, S410, T800, UX10, V110,
X500, X600, ZX10
Number of bays 2
Number of LEDs 5 per bay
AC-in power 100 ~ 240 V
DC output 8.4 ~ 17.4 V, 2 ~ 4 A
Charging time Maximum 5 hours
(at 25 °C / 77 °F)
Dimensions 160 × 180 × 72.5 mm
Weight 1.22 kg (Max.)
5 °C (41 °F) ~ 40 °C (104 °F)
Operating
temperature
Regulations EMC: BSMI, CCC, CE, FCC
Safety: CB, UL
Green product RoHS: 6 European Union RoHS
coverage banned materials
Others: 12 universal GP product
banned materials
Specifications
Inserting Battery Pack(s)
Select Models Only: The main battery pack of
K120 requires installation of a guide plate. Insert
the guide plate to the right side of the battery
slot at an angle (as shown by
and then push it toward the right to engage it

(as shown by below).
The bay 1 and bay 2 slots of the battery charger
can be for one of the battery combinations as
listed below:
Bay 1 Bay 2
Main battery Main battery A140, B300, B360,
Main battery 2nd battery
2nd battery 2nd battery
High capacity High capacity
battery battery
Note the orientation and
insert the battery pack to
the matching bay. (Shown
here is one type of the
applicable battery packs.)
CAUTION: When inserting or
removing the battery pack,
be sure to do it in a straight
up or down manner. Never
 
and below)
Applicable computer
models
F110, K120, RX10,
S410, T800, UX10,
V110, X500, X600,
ZX10
B300, S410, X500,
X600
B300, S410, X500
B360, K120, RX10,
UX10, ZX10
insert or remove it
in a slanted way
because this can
damage the con-
nector pins.
1