Idiomas disponibles
Idiomas disponibles
o Donot handleor operate a chainsaw
whenyouarefatigued, i ll, upset,or if
youhavetakenalcohol, d rugs,or me-
dication. Y oumustbein goodphysi-
cal condition andmentally alert.If you
haveanycondition thatmightbe ag-
gravated by strenuous work,check
withdoctorbeforeoperating. W atch
whatyouaredoing,Usecommon
sense.
• Do notstartcuttinguntilyou havea
clearworkarea,securefooting,and
especially if youarefellinga !ree,a
retreatpath.Keepworkareaclean,
OPERATE
'(OUR
SAW SAFELY
° Do not operate with one hand.. Seri-
ous injury' to the operator, helpers, or
bystanders
may result from one-
handed operation., A chain saw is in-
tended for two-handed
use..
• Do not operate saw from a ladder or
in a tree,,
• Make sure the chain will not make
contact with any object while starting
the saw. Never start the saw when
the guide bar is in a cut.
o Don't force chain saw. It will do the job
better and safer at the rate for which it
was intended.
° Do not put pressure on the saw, es-
pecially at the end of the cut. Doing
so can cause you to lose control
when the cut is completed..
• Stop the saw before setting it down.
° Hand carry saw only when motor is
stopped,. Carry the chain saw by the
front handle with the saw stopped, fin-
ger off the switch, the guide bar and
saw chain to the rear.
° Use the right tool, cut wood only
Don't use chain saw for purpose not
intended; for example,
don't use chain
saw for cutting plastic, masonry, non-
wood building materials.,
° Do not operate a chain saw that is
damaged, improperly
adjusted, or not
completely
and securely assembled,
Always replace bar, chain, hand
guard, or other parts immediately
if
they become damaged,
broken, or
otherwise
removed,.
° Inspect chain saw cords periodically
and if damaged,
have repaired by a
Sears Service Center.
MAINTAIN
YOUR SAW IN GOOD
WORKING
ORDER
° Have all chain saw service performed
by a Sears Service Center except the
items tisted in the M@.,INTENANCE sec-
tion of this manual.
3
- Make certain saw chain stops moving
when tdgger switch is released.
* Keep the handles dry and clean and
free from oil and grease
, Keep oil cap and fasteners securely
tightened..
° Nonconforming
replacement
compo-
nents or the removal of safety devices
may cause damage to the unit and
possible injury to the operator or by-
standers,
Use onliy Craftsman acces-
sories and replacement
parts as rec-
ommended.
Never modify your saw
. Maintain chain sa_wwith care,
- Keep unit sharp and clean for better
and safer performance,
. Follow instructions for lubricating and
changing
accessories,
o Unplug the chain saw from the power
source when not in use, before servic-
ing, and when changing accessories
and attachments,
such as saw chain
and guard.
. Check for damaged parts, Before fur-
ther use of the chain saw, a guard or
other part that is damaged should be
carefully checked to determine that it
will operate properly and perform its
intended function.. Check for align-
ment of moving parts, binding of mov-
ing parts, breakage of parts, mounting
and any other conditions that may af-
fect its operation. A guard or other
part that is damaged should be prop-
erly repaired or replaced by a Sears
Service Center unless otherwise indi-
cated elsewhere in the instruction
manual,.
o When not in use, chain saws should
be stored in a dry; high or locked-up
place out of the reach of children,
° When storing sa_, unplug and use a
bar sheath or carrying case.,
ELECTRICAL
SAFETY
_,WARNING:
Avoid a dangerous
environment..
To reduce the risk of
electrical
shock, do not use in rain, in
damp or wet locations,
or around
swimming
pools, hot tubs, etc.
Do not
expose to snow, ravin, or water to avoid
the possibility
of electrical
shock.
Do
not handle extension
cord or plug with
wet hands.
° Use a voltage supply as shown on
unit.
o Avoid dangerous situations.
Do not
use in the presence of flammable
liq-
uids or gases to avoid creating a fire
or explosion and!or causing damage
to unit,.
