Idiomas disponibles
Idiomas disponibles
3.4.
Cleaning
Disconnect the pump from the solar panel before any cleaning, adjustment, or replacement of
accessories, and if the device is not in use.
Pump :
If the pump begins to lose power or stop working after a while, check for sediment, scale, or dirt
buildup in the filter. Remove the pump cover and impeller cover. Clean these parts and the filter
with fresh water.
1 - Rotor
2 - Rotor cover
3 - Filter
4 - Pump cover
Solar panel:
• The panel should be cleaned periodically with soft tissue.
• It is recommended that the panel be cleaned regularly to maintain optimal conversion of solar
energy to DC power.
• Do not spray the solar panel with a stream of water or immerse it in water.
• Use only non-corrosive agents for cleaning surfaces.
3.5.
Storage
Charge the battery for at least one day in direct sunlight when the pump is used for the first
•
time or after a long break from use.
To maintain long battery life, charge the battery fully and disconnect the pump from the solar
•
panel before putting the unit into storage.
•
Store the unit in a dry and cool place protected from moisture and direct sunlight.
3.6.
Troubleshooting
1) The pump does not work even though the solar panel is exposed to full sunlight.
• No connection to the solar panel - check the cable connection.
• Impeller is blocked - To clean the pump, remove the front plate and impeller. Use a small
brush or steam to remove any dirt.
