Idiomas disponibles
Idiomas disponibles
Status LED
Status LED – segments
Status LED
Flashes
slowly every
green
3 seconds
Lights up
green
continuously
Flashes
every sec-
green
ond
Lights up orange briefly
after plugging in
Green LED goes out
briefly every 3 seconds
Flashes orange slowly
every 5 seconds
Flashes red
Segment 2 lights up
orange
16 / 52
Using the charging station
Function
Ready for operation (charging cable is not yet plugged in on both sides;
optional: The charging station was authorized correctly by key switch or
RFID card)
Ready for charging (charging cable is plugged in on both sides and
locked)
Charging procedure is carried out (applies for "EN 61851 Mode 3" charg-
ing procedure)
Wait for locking (charging cable was plugged in and the system attempts
to lock the plug)
Wait for unplugging (charging procedure complete, vehicle unplugged)
Temperature limit exceeded (charging procedure temporarily interrupted;
charging continues after cooling down)
Malfunction (for details, see "Troubleshooting")
Commissioning mode
(the charging station is in commissioning mode)
Status LED - segments
The status LED provides information about the
current operating state of the charging station
and consists of 4 segments (S1 to S4) which
can light up together or individually.
All segments can light up or flash in different
colors.
If not otherwise specified, all 4 segments light
up together.
