Dynex DX-32L200A12 Manual De Instrucciones página 10

Ocultar thumbs Ver también para DX-32L200A12:

Idiomas disponibles

till the chromatic coordinates of both steps are (285, 293), then press MENU to return to the

previous menu or select SAVE TO EEPROM to save the data.

Check if color temperature of COOL and WARM meet the requirement, if not, adjust GAIN RED,

GAIN BLUE, OFFSET RED and OFFSET BLUE to make them meet requirement, then save the

data.

2.2.2.2 DTV channel adjustment (HDMI has the same white balance data with DTV)

In TV mode, choose TV source as Antenna and switch to channel 26, the picture is 11 gray scale,

enter factory menu Color Temp, and set Color Mode to NORMAL, fix GAIN GREEN, adjust

GAIN RED, GAIN BLUE to make the chromatic coordinate of 9

OFFSET GREEN, adjust OFFSET RED, OFFSET BLUE to make the chromatic coordinate of 3

step to be(285, 293). Repeat adjust GAIN RED, GAIN BLUE, OFFSET RED and OFFSET BLUE

till the chromatic coordinates of both steps are (285, 293), then press MENU to return to the

previous menu or select SAVE TO EEPROM to save the data.

Check if color temperature of COOL and WARM meet the requirement, if not, adjust GAIN RED,

GAIN BLUE, OFFSET RED and OFFSET BLUE to make them meet requirement, then save the

data.

2.2.2.3 YPrPb channel adjustment

First perform ADC calibration: input 75% color bar plus gray scale signal in 480i/60Hz format

(VG848 Timing is 968, PAT is 918), enter factory menu ADC Setting and do ADC AUTO

adjustment once.

White balance adjustment: connect to YPbPr port, input 8-step gray scale signal in

1920X1280i/60Hz format from VG848, enter factory menu Color Temp, set Color Mode to

NORMAL, fix GAIN GREEN, adjust GAIN RED, GAIN BLUE to make chromatic coordinate of 7

step to be (285, 293), fix OFFSET GREEN, adjust OFFSET RED, OFFSET BLUE to make

chromatic coordinate of 2

OFFSET RED and OFFSET BLUE till the chromatic coordinates of both steps are (285, 293),

then press MENU to return to the previous menu or select SAVE TO EEPROM to save the data.

Check if color temperature of COOL and WARM meet the requirement, if not, adjust GAIN RED,

GAIN BLUE, OFFSET RED and OFFSET BLUE to make them meet requirement, then save the

data.

Check if color temperature of COOL and WARM meet the requirement, if not, adjust GAIN RED,

GAIN BLUE, OFFSET RED and OFFSET BLUE to make them meet requirement, then save the

data.

Aligment Instructions

step to be (285, 293). Repeat adjust GAIN RED, GAIN BLUE,

step to be (285, 293); fix