BY ETHERNET CABLE (RJ45) VIA A PAIR OF PLC SOCKETS :
Principle: a pair of PLC sockets, a common and fairly simple piece of equipment to install, available at all computer
merchants, allows, for a reasonable sum (≈35€), to create in a few seconds and very easily an additional local Internet
access point. This local point is itself connected to your general Internet access point by automatically "passing" their
data between them via the phase of the electrical network running in the walls of the house. If your budget and your
building allow it, this is the best solution. It is indeed more robust and stable over time than WIFI... and without tedious
configuration !
PRECAUTIONS
Reminder: do not connect the powerline plug to a power strip, as this may reduce performance.
On a three-phase electrical installation, if your general Internet access point is on a different phase from the local wall
socket where you wish to place a PLC socket, you will also need to install phase couplers.
L.BOX LD
RJ45
Gateway
Ethernet
cable
BY 3G/4G ROUTER :
Principle: in case the L.BOX LD is placed in a totally isolated place, or just too far from your "Internet access point",
it is possible to use a 3G/4G router. The subscription to a SIM card based subscription with a telephone operator is then
mandatory.
L.BOX LD Gateway
Automatic data circulation
between the two PLCs
via your home's electrical
network
CAUTION :
Check the presence of the 3G or 4G network at the installation site beforehand.
RJ45 Ethernet cable
METHOD 2
RJ45
Ethernet
cable
METHOD 3
4G router
— 21 - § EN —
Internet box
4G antenna
Internet
Internet
Click !