Assembly Of The Distribution Manifold - PAW DN 40 Manual De Instrucciones Para El Montaje Y Manejo

3.1

Assembly of the distribution manifold

B-6
1
99x11x-mub-ml – V02
3 Assembly and installation [specialist]
1. Choose the position for installation.
Floor bracket (1):
The distance to the wall must be about
25 cm. Fasten the floor bracket with the
enclosed wall plugs and screws.
You can reduce the height of the wall
brackets by shortening the guide rails.
Wall bracket (2):
Fasten the wall bracket to the wall with the
enclosed wall plugs and screws.
2. Take off the front insulation shell of the
distribution manifold.
3. Put the distribution manifold onto the bracket
and push the screws of the bracket through
the ears at the manifold.
4. Fix the manifold to the bracket.
2
2009/07