Assembly And Installation [Specialist] - PAW DN 40 Manual De Instrucciones Para El Montaje Y Manejo

3 Assembly and installation [specialist]

3 Assembly and installation [specialist]
The modular distribution manifold can be installed such that the connections for the heating
circuits are either directed to the top or to the bottom.
NOTICE
Damage to property!
The location of installation must be dry, load-carrying, frost-proof and protected against
ultraviolet radiation to prevent material damage to the installation.
NOTICE
Damage to property!
The covers at both ends of the distribution manifold must not be turned by 90°.
In this case the flow and the return chamber would be connected, resulting in
undesired circulation.
Keep in mind that the flow is connected to the pipe connection marked "V" and the return is
connected to the pipe connection marked "R".
You need either wall brackets or floor brackets to mount the distribution manifold.
Floor bracket set (DN 40 or DN 50)
Item no. 41671
2009/07
Wall bracket set (only DN 40)
99x11x-mub-ml – V02
Item no. 41651
B-5