Idiomas disponibles
Idiomas disponibles
,_ CAUTION
J
1. Inspect hose connection
before each use
2. Do not exceed 90psi when using pneumatic
tools.
3. Do not kink, twist, knot or abrade hose;
Applicable
Range:
is applicable
for pneumatic
tool and accessories.
Specifications:
Air tools Maximum
Working
Pressure .......... 90psi
Operation
Tool
use
and
care
1. Use clamps
or another
practical
way
to secure
and
support
the
workpiece
to a stable
platform,
Holding the work by hand or against the body is unstable and to lead
to loss of control.
2. Do not force
the
tool.
Use
the
correct
tool
for the
application.
The correct t0ol
will do the job better and safer at the rate for which the tool is designed.
3. Do not
use the
tool
if the
switch
does
not
turn
the
tool
on or off. Any tool that
cannot be controlled
with the switch is dangerous
and must be repaired.
4. Disconnect
the
tool
from
the
air source
before
making
any
adjustments,
changing
accessories,
or storing
the
tool,
Such preventive
safety measures
reduce
the risk of starting the tool unintentionally.
5. Store
the
tool
when
it is idle
out
of children
and other
untrained
persons.
A
tool is dangerous
in the hands of untrained
users.
6, Maintain
the
tool
with
care,
Keep a cutting tool sharp and clean. A property maintained
too, with sharp cutting edges reduced the risk of binding and is easier to control.
7. Check
for misalignment
or binding
of moving
parts,
breakage
of parts,
and
any
other
condition
that
affects
the
tool's
operation.
If damaged,
have the tool
serviced
before using. Many accidents
are caused by poorly maintained
tools. There is a risk
of bursting if the tool is damaged.
8. Use
only accessories
that
are
identified
by the
manufacturer
for the
specific
tool
model.
Use of an accessory
not intended for use with the specific tool model, increases
the risk of injury to persons.
