Idiomas disponibles
Idiomas disponibles
Connect the appliance only to the voltages specified in this manual.
- Before switching the operating mode (COOL/WARM), place the selector in the OFF
position for at least three minutes; this shrewdness reduces the thermal stress of the
appliance, which could cause malfunctions.
CAUTION!!!
1. Close the lid properly
2. Connect the cable (AC or DC), select the desired power supply (COOL/WARM), then set
the fan speed in proportion to the quality of material in the container and the temperature of
the surrounding environment.
INDICATIONS FOR USE
Food products can be stored only in the original package or in suitable containers
Make sure there are objects or products in the refrigerator that can be cooled
Do not excessively cool drinks or liquid food stored in glass containers, as they
dilate if frozen, causing the glass to break
Make sure that the refrigerator is well ventilated, so that the heat generated can
escape: otherwise correct functioning is no longer guaranteed. In particular, make
sure that the ventilation openings are not covered
The appliance must not be exposed to rain or other atmospheric agents
Clean the inside of the fridge before each use
The appliance has been designed for use in domestic and similar applications and
is not suitable for professional or continuous use
It is advisable to insert previously cooled or heated food and drinks inside the
fridge
Place the refrigerator on a flat and stable surface
The refrigerator must be opened as few times as possible and immediately closed,
to maintain a constant temperature inside
Even when the fridge is off, thanks to the special insulation, the food and drinks will
be kept fresh for a long time. To enhance and prolong the cooling effect over time,
the use of cold accumulators is recommended
After a long period of operation, it is possible that water will deposit inside the
fridge.
This is normal because the humidity in the air condenses when it cools down. If
necessary, remove excess moisture with a dry cloth
15
