as shown in figure 3.
2. Present this wall bracket at the location where it is to be installed, then mark the
bracket holes on the wall (make sure the bracket is level) at the ends of the bracket.
3. Using a drill, make holes in the wall of the same diameter as the fixing screws. Insert
a fixing dowel into the previously drilled holes.
4. Fix the bracket to the installation wall using the screws as shown in figure 3, make
sure that the screws are aligned with the holes.
5. Once the wall bracket has been correctly installed, you can fix the appliance in place
by moving the appliance closer to the wall and reattaching the screws removed in
step 1.
6. Distance between holes (screws 4x35 mm):
Model
C1000 Cristal
C2000 Cristal
4. CONTROL PANEL
The buttons on the product control panel correspond to those that will appear in the
application. Fig. 4
1. Display
2. Increase button
3. Decrease button
4. Power button
5. Mode button
6. Timer button
7. Receiver
8. Child lock button
Distance between the holes
28cm
44cm
CONVECTOR EVVO C1000/C2000 CRISTAL NEGRO/BLANCO
ENGLISH
21
