Water Terminal Controller
Infrared Remote
The home screen display may differ
according to its configuration. Depending
on your installation, some of the functions
described in this manual may not be active.
To visualize active functions and battery
status, press the Test button
The active function icons flash on the
■
right side of the screen.
The battery status is displayed at the
■
bottom of the screen:
ON (Battery status = Normal)
OFF (Battery status = Low)
LCD screen
Action buttons
Up
Down
Test / Tilting blinds
Function buttons
Lighting
Blinds
Fan speed
Temperature
Occupancy control
Occupied
Unoccupied
Display
.
Important
The maximum operating range for the
remote control is approx. 5 m.
No obstructions such as curtains or plants
should be between the control and the unit.
Direct sun on the receiver may interfere with
good signal reception.
The remote control must be directed towards
the unit receiver when pressing the buttons of
the desired functions.
If you have any questions, please contact your
installer for more information.
Example:
You may control:
•
Lighting
•
Blinds
•
Temperature
•
Fan speed
•
Battery level
Scan this QR code
to access Carrier
technical literature.
You may control:
•
Lighting
•
Temperature
•
Fan speed
•
Battery level
1