Standby Mode; Reset Button - BAT EM 231 Instrucciones De Uso

Operating instructions EM 231
GB
Press the FUNC button (6) again to display the power
consumption of the connected appliance in the value field
(10) on the LCD. kWh (13) is displayed in the unit section
and the POWER FACTOR (27, 28).
Press the FUNC button (6) again to display the TOTAL
PRICE (10, 18) and the TOTAL ON TME (21, 22, 24) in
minutes of the connected appliance.
Press the FUNC button (6) again to display the VOLTac.
(15) and the Hz (26, 27). Hold the FUNC button (6) at
least 2 seconds to display COST/kWh.
If the total load is exceeded MAX OVERLOAD WARNING
(17) will flash on the display (2).

4.4.3 Standby Mode

The display (2) returns approx. 10 seconds after pressing
the buttons to standby mode and shows the current time
(20, 21, 22, 23, 25), day of the week (19), line voltage
(10, 15) and frequency (26, 27).

4.4.4 Reset Button

Press the reset button MASTER CLEAR with a pointed
object to clear all data in the memory including the current
time and all programs. For a few seconds the complete
display (2) with all parameters is shown.
30