BAT EM 231 Instrucciones De Uso página 28

Idiomas disponibles
  • ES

Idiomas disponibles

Operating instructions
EM 231
GB
until Cost/kWh (16) is shown. If already 2 prices were
entered these can be displayed in turn by pressing the
FUNC button (6).
Set Cost/kWh (Price 1)
Press and hold the SET button (5) until the fist digit flashes
to set the cost/kWh after the cost/kWh for price 1 (18) are
displayed. Set the correct value for the first digit with the
UP button (4). Now press the SET button (5) again until
the second digit flashes and set the correct value with the
UP button (4). Repeat the procedure for the third and the
fourth digit.
You can move the decimal point by pressing the SET
button (5) to start flashing and move it with the UP button (4)
to the correct position.
Press the SET button (5) again, and the time display
(- : - -) behind ON TIME (24) for the entered price 1 (18)
starts flashing. Press SET (5) to finish the setting proce-
dure for price 1 if no second price is needed.
To enter a second price (e.g. day/night tariff) also set a
starting point for price 1 first. While the time display is
flashing behind ON TIME (24) for price 1 (18) press UP
button (4) to set the day of the week for the starting point
28
loading

Productos relacionados para BAT EM 231