Idiomas disponibles
Idiomas disponibles
Q U I C K S T A R T G U I D E
PAIRING BLUETOOTH
Toggle the switch to the left, make sure that the keyboard is under the wireless mode:
1. Hold Fn+1/2/3 for 3-5 seconds till the indicator flashes fast in blue, the numpad is
ready to pair.
2. Turn on your Bluetooth device and find 'Epomaker EK21-1/2/3', then connect.
When the numpad is connected to the Bluetooth device, the indicator stops
flashing, the connection is done.
3. Press Fn+1/2/3 to toggle between the Bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHZ
Toggle the switch to the right, make sure that the numpad is under the 2.4g
wireless mode:
1. Hold Fn+4 for 3-5 seconds till the 4 key flashes fast in green, the keyboard is ready
to pair.
2. Insert the 2.4G dongle to your device, the indicator stops flashing and the
connection is done.
WIRED MODE
Toggle the switch to the middle, and the numpad enters to the wired mode
successfully.
Note:
The battery charges under either wireless or wired mode, as
long as it is plugged.
BATTERY INDICATOR
Low battery: Fn indicator flashes red
Charging: Fn indicator stays in red
Fully charged: Fn indictor off
TECHNICAL ASSISTANCE
For technical assistance, please email to [email protected] with your purchase
order number and a detailed description of your issue.
We normally respond to enquiries within 24 hours. If you purchased your keyboard
from a distributor or not from any official store of Epomaker, please contact them
directly for any additional help.
EN
