DR.ÖTEK MTXE Manual De Usuario página 28

accidents.
2)Do not break into private homes without permission.
3)Avoid areas where power lines, cables, or pipes may be buried,
especially for placing flammable gases and liquids.
4)Do not detect in military areas where bombs or gas explosives may be
buried.
5)When excavating the target, use reasonable methods and do not
destroy the vegetation. After the excavation, the original surface state
should be restored.
Troubleshooting Guide
symptom
No power, the LCD has no
indication, no boot sound.
Continuous hair "DI" "DI" sound
The LCD showed normal, but had
no detectable function
LCD showed normal, but showed
low detection sensitivity
Make irregular sound or target
recognition cursor jump
resolvent
1. Ensure that the battery is
installed correctly
2. Replace the battery
1. Determine if other metal
detectors are working nearby
2. Reduce the sensitivity
appropriately
The connection to the search coil
is poor. Check the cable is Plugged
in correctly.
When turning on, there may be
metal near the search coil. Ensure
the search coil is distant from the
ground, and then turn on the unit
again.
1. Do not use it indoors, because
there is more metal indoors.
2. Whether there are
electromagnetic interference
sources nearby, such as power
24