Idiomas disponibles
Idiomas disponibles
Turning the ROTARY TUNING Knob with the TUNING SPEED CONTROL set on FAST
-
will change each band as follows:
' FM:
100 kHz
LW: °
9 KHz
MW:
9 KH2/10 kHz
SW:
5 kHz
When set on SLOW, the frequencies change as follows:
FM:
50 kHz
LW:
1 kHz
MW:
1 kHz
SW:
1 kHz
With the TUNING SPEED CONTROL set on LOCK, ROTARY TUNING will not function.
Scan Tuning
.
|
Use scan tuning to quickly locate a station or to monitor several stations within a specific
band.
1.
Turn on radio by pressing power button.
2.
Selecta band.
3.
Adjust antenna or radio position depending on selected band.
4
Press and hold the (/\) or (V) buttons and the radio will scan all the frequencies
in that band, and will stop automatically each time it lands on an active station. Signal
strength is recorded on the SIGNAL STRENGTH INDICATOR.
power
time
set
0a
oo
manual tuning
120m
90
aS
a-
@
60m
49m
Cs)
on
31m
25m
auto scan
On
=
5.
Press and hould the (A) or (V ) buttons again to resume scanning. When you
reach the upper or lower limits of the band, the scanning starts all over again
as long as the button is depressed.
Memory Tuning
|
You may store up fo eighteen different frequencies on the SW band and up to nine
different frequencies on each of the other bands for instant selection of your favorite stations.
26
