Sennheiser Infraport SET 250 Instrucciones Para El Uso página 11

Ocultar thumbs Ver también para Infraport SET 250:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
CHARGING THE ACCUPlUG / CHARGE INOlCATlON
► To charge the acctiplug, in»cri live receiver containing rhe accuplug iiico ihc
storage and d larging comportment
I he chaigmg process
b
indicated b>
tlic LED 'iy. Switch ofithe receiver before charging the accuplug!
► A second BA 151 accuplug can lx charged in the charging compartment
<J). This charging process is indicated by the LED <i.
When the accuplug Ixcome* weak inobe interference and sound
distortions arc sure signs of a weak accuplug), switch off tlx receiver and
recharge the accuplug. (If necessary, use a second accuplug to listen
while the first accuplug is being recharged.)
Recharge the accuplug immediately when it is flat. If the accuplug is flai
bui is left in the switched on receiver, this reduces the service life of the
accuplug I,.total discharge").
► As far as possible, use the full capacity of an accuplug before your
recharge it. Frequent short discharge and recharge cycles prematurely
reduce its cltarging capacity.
► Charge the accuplug for 24 hours before you use it for the first time'
NOTE
► Charging in the charging compartments "i and © svorks even "hen the
transmitter is switched off as long as it remains connected to the mains!
► The transmitter is switched off when you recharge the receiver
containing die accuplug in the charging compartment ;
20
RECHARGEABLE ACCUPLUGS HAVE A .CHARGING CYCLE"
Drpending on how long your receiver has been in use. you must also recharge
the BA 151 accuphig for a certain time. A simple rule of thumb will help you to
decide what dmc is necessary:
Operating lime > 3 - recharging t*ne
1 ton' l<M*n«ng
2 hogiI fastening
3 hours listening
J
to»<*
recrikfgmg
t
hooo rst fcsrgmg
» tours recharging
OPERATION WITH A SECOND ACCUPLUG
By using a xmnd accuplug. you can increase die listening umc widi your receiver,
'll* second accuplug is always inserted in die dun ging compartment © of the
transmitter to ensure that u is ready and fully charged when it is needed.
If you use your system with only one accuplug, you must stop after
about five hours and recharge dx accuplug for about 15 hours in die
charging compartment © of the transmitter.
U^^toch*iQ«
^
I-I I I I II I 11 M I II
2
4
6
8
10 12 14 16 18 20 22 24 26 28 30 32 ...
With a second accuplug. you can listen for more than twice die time Simply
place the discharged first accuplug hack into the charging compartment. After the
partiali recharge, their is an additional (partial) amount of power available:
^ itfll M-l
i l'
M* SW4 -
2
d
6
8
10 12 14 16 18 2D 22 24 26 28 30 32 ...
21
loading

Este manual también es adecuado para:

Infraport set 500