Functional Description - Milwaukee 2705-20 Manual Del Operador

Ocultar thumbs

Contenido

página de 21

/ 21
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

• When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal

to another. Shorting the battery terminals together

may cause burns or a fire.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

• Do not use a battery pack or tool that is dam-

aged or modified. Damaged or modified batteries

may exhibit unpredictable behavior resulting in fire,

explosion or risk of injury.

• Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging

improperly or at temperatures outside the specified

range may damage the battery and increase the risk

of fire.

SERVICE

• Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

DRILLS AND IMPACT DRILLS

• Wear ear protectors when impact drilling. Expo-

sure to noise can cause hearing loss.

• Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

• Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring. Cutting ac-

cessory contacting a "live" wire may make exposed

metal parts of the power tool "live" and could give

the operator an electric shock.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

•

Some dust created by power sand-

WARNING

ing, sawing, grinding, drilling, and

other construction activities contains chemicals

known to cause cancer, birth defects or other repro-

ductive harm. Some examples of these chemicals

are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are spe-

cially designed to filter out microscopic particles.

SYMBOLOGY

Volts

Direct Current

No-Load Revolutions per Minute (RPM)

Blows per Minute Under Load (BPM)

UL Listing Mark para

Canadá y Estados Unidos

SPECIFICATIONS

Volts .............................................................. 18 DC

Battery Type .................................................M18™

Charger Type ................................................M18™

Recommended Ambient

Operating Temperature ......................0°F to 125°F

Cat. No. ..................................................... 2705-20

No Load RPM ............. Low 0 - 550 / High 0 - 2 000

Steel ................................................................. 1/2"

Flat Bit in Wood ............................................. 1-1/2"

Auger Bit in Wood .......................................... 1-1/2"

Hole Saw in Wood ............................................... 3"

Screws in Wood ............................................ Ø 3/8"

Cat. No. ..................................................... 2706-20