Power Dynamics CSBA3L Manual De Instrucciones página 4

INSTALLATION AND CONNECTION OVERVIEW
1. Drill a hole in the ceiling, big enough to fit the speaker (sizing below).
2. If the PA system is turned on, turn it off before making any connection.
3. Connect the speaker via two cables to the sound system (see below for a connection overview); when connecting several
speakers, make sure that all speakers have the same polarity and that the amplifier is not overloaded. Before starting with
the installation, you must clarify how many speakers you would like to install in the room.
4. Insert the speaker in the hole.
5. Use the spring clamps to secure the speaker.
Connect the speaker(s) to the amplifier output, using a two-core suitable cable.
If you are connecting multiple speakers, make sure that all speakers have the same polarity and that the amplifier is not
overloaded.
Always make sure that the output signal is not distorted and that your speakers will not get damaged.
When distortions can be heard, either the amplifier or the speaker is overloaded. In order to avoid damage, reduce the volume
immediately when distortions can be heard. When speakers are destroyed by overload, the guarantee becomes void.
Always insulate the unused connection cables.
4