Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly and Installation of the Components
STEP 1 - Unpack the assembled operating handle.
Make sure that no damage was done during transport.
Assemble the operating handle on the bracket, attached to the gearbox, using:
02 M12x70mm bolts + 04 M12 washers + 02 M12 locking hex nuts.
STEP 2 - With the operating handlebar assembled, connect the blade tilt adjustment cable,
using the 02 M6x8mm allen screw.
10
Capítulos
Tabla de contenido
Solución de problemas
