Costway TM10025 Instrucciones De Montaje página 10

Idiomas disponibles

Step 6: Black Grip Assembly

First, fasten the black grip (C) on the nodes with a long nut (D) using the tool

Part I. NOTE: All of the nodes will need a grip, except the nodes of the bottom

circle.

Tips: Before this step,make all tubes are in right position and fasten all screws

with tools, The gap of the grip needs to be checked in pole ① and pole ⑤(or

pole ⑥)，as shown in the following picture.

Second, repeat the above

operation for the rest nodes.

Step 7: Swing Seat Assembly

First, tie the first strap (M) around the top tube tightly, and put one end D ring

through the other side D ring, make the D ring like the following picture. Then tie

the second one.

Second,install swing seat (N) with its two carabiners.

Now, the assembly of the dome climber with swing seat is completed.

Congratulations!