Idiomas disponibles
Idiomas disponibles
PRODUCT FEATURES
1. Device
2. +/- button
3. Power button
4. Indicator light
5. Coarse emery head
6. Fine emery head
7. Chrome head
8. Needle emery head
9. Felt cone head
10. Tungsten steel head
11. USB charging cable
12. Accessory case
CHARGING YOUR DEVICE
1. Charge your device by connecting to a USB power supply using the USB cable
supplied. The power indicator light will flash red while the device is charging and
will turn blue when the battery is full. When the device is fully charged, it should be
disconnected from the power supply.
2. A 3.5 hour charge will provide up to 60 hours of cordless use.
3. When the battery level is low, the power indicator light will flash red. Before it turns
off, the power indicator light will flash three times.
INSTRUCTIONS FOR USE
1. Open the accessory case.
2. Install the attachments by pushing them into the recess in the top of the device until
securely in place.
Choose from the following attachments:
•
Coarse Emery Head: for filing and repairing natural nails, also for the front edge
and sides of acrylic nails
•
Fine Emery Head: for filing and repairing natural nails, also for the front edge and
sides of acrylic nails
•
Chrome Head: for filing and polishing around the cuticles and across the surface of
natural and acrylic nails
•
Needle Emery Head: for removing cuticles and hard skin from around the sides
of the nails
•
Felt Cone Head: for cleaning, polishing and brightening the surface of the nails
•
Tungsten Steel Head: for removing gel nail polish from nails
3. After installing the head, switch on the main unit by pressing and holding the
power switch for a couple of seconds. The device will switch on and the indicator
light will illuminate white.
4. To swtch the rotation of the head, short press the power button once.
1
2
3
4
I
GB
2
5
6
7
8
11
9
10
12
