Idiomas disponibles
Idiomas disponibles
_WARNING:
If received
assembled,
review all assembly
steps to ensure your unit
is properly
assembled
and all fasteners
are
secure.
ADJUSTING
THE ASSIST HANDLE
_, WARNING:
Whenadjustingthehan-
dle,
be sure it remains
between
the trigger
and the safety label.
1.
Loosen wing nut on handle.
2.
Rotate the handle on the tube to an up-
right position;
retighten wing nut.
ATTACHING
THE
SHIELD
_
WARNING:
Theshieldmustbeprop-
erly
installed,
The
shield
provides
partial
protection
from the risk of thrown
objects to
the operator and others, Your unit is equipped
with a line limiter
blade, which
cuts excess
line to the proper
length while
runnh_g. The
line iimiter blade
(on underside
of shield)
is
sharp and can cut you,
NOTE:
If shield
is not properly
installed.
damage
to unit (including
motor failure) will re-
sult.
1.
Remove washer
and wing nut from shield.
2.
Assemble
parts as shown.
3.
Tighten wing nut securely.
/
Wing Nut
CAUTION:
NOTE:
Remove
Sharp line
and use washer
limiter blade
and wing nut from
this bolt for assem-
bling shield,
KNOW YOUR TRIMMER
READTHIS INSTRUCTION MANUAL AND SAFETY RULESBEFORE OPERATING YOUR UNIT
Compare the illustrations with your unit to familiarize yourself with the location of the various controls
and adjustments.
Save this manual for future reference.
Semi-automatic
Head with .065" line.
/
Debris Shield
!
Tap Button
Line Limiter Blade
Assist Handle
Motor
Pigtail
Housing
Plug
Trigger Switch
Cord Retainer
RECESSED
PLUG
The RECESSED
PLUG is where you attach
your extension
cord to the unit.
TRIGGER
SWITCH
The TRIGGER
SWITCH
is used to turn enthe
unit. Squeeze
the trigger switch to operate the
unit. Release
to stop.
LINE
LIMITER
BLADE
The LiNE LIMITER
BLADE
cuts the cutting
line to the proper cutting length.
ASSIST
HANDLE
The ASSIST
HANDLE
is used to he_p hold
and guide the unit.
TRIMMER
HEAD
The TRIMMER
HEAD hems cutting
line and
rotates during operation.
TAP
BUTTON
The TAP BUqq-ON
is used to advance
the
cutting
line during
operation
and to remove
the spool during line replacement.
4
