Idiomas disponibles
Idiomas disponibles
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1]
:
[Command 2]
:
[Set ID]
:
[DATA]
:
[Cr]
:
[ ]
:
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the
PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-
viable functions or communication errors.
Data 00: Illegal Code
Real data mapping (Hexadecimal : Decimal)
• When you enter the [data] in hexadecimal, refer to following conversion table.
• Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00: Step 0
01: Step 1 (Set ID 1)
...
0A: Step 10 (Set ID 10)
...
0F: Step 15 (Set ID 15)
10: Step 16 (Set ID 16)
...
First command to control the TV. (j, k, m or x)
Second command to control the TV.
You can adjust the [Set ID] to choose desired monitor ID number in option menu.
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to '0' , every connected
set can be controlled.
* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to
0x63) on transmission/receiving protocol.
To transmit command data (hexadecimal). Transmit 'FF' data to read status of
command.
Carriage Return - ASCII code '0x0D'
Space – ASCII code '0x20'
32: Step 50 (Set ID 50)
33: Step 51 (Set ID 51)
...
63: Step 99 (Set ID 99)
...
C7: Step 199
C8: Step 200
...
FE: Step 254
FF: Step 255
...
01 00: Step 256
...
27 0E: Step 9998
27 0F: Step 9999
...
21
