Idiomas disponibles
Idiomas disponibles
Note: See PARTS AND FEATURES for belt
number.
Loop the other end of the belt on the belt
pulley on the agitator.
insert the agitator by placing the rounded
portion of the end cap down into the slot in
the nozzle base.
Note: It may be necessary
to hold the furni-
ture guard out of the way in order to allow
proper insertion of the agitator into the noz-
zle base.
Nozzle
Agitato_
Base
Furniture
End
Base
Guard
Cap
Slot
Note: Care must be taken due to the belt
tension during reassembly.
Press firmly,
checking
to
see that
each end is
completely
inserted.
Check to see that the belt is centered on
the belt pulley, Turn the agitator with your
fingers to see that it turns freely.
To re-attach
the agitator
cover, insert
the six (6)
tabs into the
six slots
along the
front edge of
the nozzle
base.
Tabs/
Slots
Lower the agitator cover to its originalposi-
tion. After positioning the agitator cover,
push forward on the two (2) locking tabs in
order to ensure that they are securely in
place.
Re-fasten the
furniture
guard retain-
ers to the
posts on both
sides of the
agitator
cover.
Ag/tator
Cover
Furniture
Guard
Retainer
Note: If the agitator cover is not installed
correctly,you may experience a loss of
performance and possibleagitator vibra-
tion, etc.
Headlight
Wire
/
Lock Tabs
Securely In
Place
Make sure the headlight wires are tucked
securely in place.
Replace
the nozzle
cover and
secure the
latches.
Latches
19
