Grohe 36 289 Manual De Instrucciones página 9

The functional unit must be adapted to the local conditions, see section
Function menu of the digital controller, F2 - Setting mode.
Operation of the digital controller, see fold-out page IV, Fig. [21] .
Button Description
Start/Stop button
Starts and stops the water flow at the saved water temperature and flow rate.
Pause button
Interrupts the water flow. Pressing the button again within 30 seconds, the operation
continues with the last selected settings.
The temperatures is limited to the value of the safety stop.
Temperature buttons
Starts the water flow and decreses or increases the water temperature.
Display when minimum temperature is reached (-).
Display when safety stop is reached (+).
Display after overriding the safety stop (+).
38 °C Overriding the safety stop
When the safety stop is reached (factory setting 38 °C), press and hold button - / +
simultaneously. Then press button + several times.
Volume control
Turning clockwise starts the functional unit and increases the flow rate until maximum.
Turning anti-clockwise reduces the flow rate until minimum.
Memory function
When the water is running the current settings can be saved by pressing and holding
the button.
Temperatures above 40 °C are not saved.
Warm-up mode
3
If no water is flowing and the pause mode is not active, pressing and holding the
button activates water flow for warm-up mode. When the preset temperature is
reached, the water flow is stopped (automatic abort after 2 minutes or by pressing a
button).
Cleaning service mode
If no water is flowing, pressing and holding both buttons simultaneously activates
cleaning service mode.
In the cleaning service mode all outlets closed and without function for 2 minutes .
Abort the cleaning service mode within two minutes by simultaneously pressing and
holding both buttons.
Different functions (F1 to F6) can be set or activated via the digital controller/diverter.
Start of the function menu only when no water is flowing.
Function F1 - Automatic filling, see f old-out page IV, Fig. [21] .
Button Description
Start the function menu
- Select the function by simultaneously pressing the - / + buttons.
• Start function F1 - Automatic filling
=> Confirm by simultaneously pressing the - / + buttons.
Changing the point of discharge by turning the ring (not for 36 292)
=> Confirm by simultaneously pressing the - / + buttons.
- Stop the water flow/timer by turning the ring anti-clockwise.
- Continue the water flow/timer by turning the ring clockwise.
- Again stop the water flow/timer by turning the ring anti-clockwise.
- After 30 minutes (max. running time) the water flow stops automatically.
- Pressing the - / + buttons saves the quantity/duration and exits the menu. Abort after
3 minutes without triggering (only when no water is flowing).
Abort the function menu by pressing and holding Start/Stopp.
Please pass these instructions on to the fitting user!
The right to make technical modifications is reserved!
Settings in the event of a power failure/when changing batteries
No settings saved by the user will be lost when changing the batteries or
in the event of an interruption of the voltage supply to the functional unit.
Visualization
The temperature is represented by the illuminated ring.
[from blue to orange (safety stop) to red].
The temperature is represented by the illuminated ring
Illuminated ring flashes blue 3x.
Illuminated ring flashes orange 3x.
Illuminated ring changes from orange to red.
Illuminated ring flashes 3x orange when the safety stop
is reached/unlocked.
Water flow is interrupted briefly and illuminated ring
flashes green 3x.
Illuminated ring flashes blue 3x at the start and end of
the warm-up phase.
Illuminated ring flashes violet 3x.
Illuminated ring flashes violet 1x when actuated.
Illuminated ring flashes violet 3x.
Visualization
Illuminated ring flashes red 1x.
Illuminated ring flashes green 1x.
Point of dischare changes
Illuminated ring flashes green 1x and timer started.
Water flow/timer stops.
Water flow/timer continues.
Water flow/timer stops.
Water flow stops.
Illuminated ring flashes green 3x.
Illuminated ring flashes violet 1x.
6