Idiomas disponibles
Idiomas disponibles
1. The most important point is to hold the garment in place firmly, rather than pulling down,
and straighten it as much as possible. When steam starts coming from the nozzle, sweep
it gently up and down over the clothes to smooth out creases immediately.
2. Steam inside pockets starting at the bottom, then up and down.
3. To steam sleeves, hold them straight and pass the steam nozzle from the shoulder to the
cuff, and then up and down.
4. To steam a collar, keep steaming the collar edges for a long time, then pass the steamer
backwards and forwards.
5. To steam edges and hems, hold the garment taut and hold the steam nozzle close to the
fabric. Pass the steamer nozzle upwards.
6. After steaming the front side, turn clothes around to do the back.
1. The steam produced by the appliance is very hot, reaching a top temperature of 160ºC, so
check before use that the clothes can be steamed at high temperatures, and do not leave
the steamer in the same position for a long time, so as not to damage the clothes.
2. When not using the product, empty the water out of the water tank, turn off the steam
switch, unplug the steamer and wait for the steam to stop. (If steam is coming from the
nozzle, turn off the steam switch and unplug. Be careful because there is still hot water in
the tank. The appliance may stay hot for some time).
3. Empty the water out of the water tank, switch off and unplug the steamer until the steam
stops. Wait until the product cools before storage.
FAILURE ANALYSIS AND TROUBLESHOOTING
Note: Unplug the appliance before troubleshooting. Pull out the plug.
PROBLEM
Steam is not coming out of the machine.
The machine does not emit steam, but the switch
indicator light is on.
The nozzle panel has water droplets.
Condensation will disappear if you continue to
use the machine.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
NOTES
Confirm whether it is plugged in and switched
on.
Check the power supply or ask a qualified
electrician for help.
Make sure there is water in the tank and turn on
the steam switch.
Continue to use the machine. The condensation
will disappear.
After using the first container of water, add a
second container of water to continue working
normally.
SOLUTION
E NGLI SH
9
